Products
Trapezoidal
Semi-Circular
Fittings
 Penda’s unmatched, in-house forming capabilities make it possible. In the thermoforming process, the plastic sheet is heated to forming temperatures, allowing it to conform to the mold in corrugated sections with a minimum thickness of 55 mil. This sturdy, yet flexible and lightweight design, make SmartDitch a cost-effective, easily deployed, long-lasting water conveyance solution.
Trapezoidal
SmartDitch offers a trapezoidal design water management channel in two specific depths/sizes:
- 12”-depth series
- 24”-depth series
|
 |
Physical Dimensions & Weights
Item Description |
12" Depth Trapezoidal |
24" Depth Trapezoidal |
Overall exterior width |
50.00 in / 1270.00 mm |
76.00 in / 1930.00 mm |
Overall exterior height |
16.25 in / 412.75 mm |
29.50 in / 749.30 mm |
Bottom channel exterior width |
10.00 in / 254.00 mm |
14.00 in / 355.60 mm |
Overall exterior length |
120.00 in / 3048.00 mm |
113.00 in / 2870.00 mm |
Lay length |
112.00 in / 2844.00 mm |
100.00 in / 2540.00 mm |
Weight Per Part |
52.00 lb / 24.00 kg |
89.00 lb / 40.00 kg |
*Measurements are overall part dimensions and are not representative of actual flow area or earthen fill area.
Back to top
Semi-Circular
SmartDitch offers a semi-circular design water management channel:
Physical Dimensions & Weights
Item Description |
24" Depth Semi-Circular |
Overall exterior width |
39.00 in / 990.60 mm |
Overall exterior height |
19.00 in / 482.60 mm |
Overall exterior length |
93.00 in / 2362.20 mm |
Lay length |
88.00 in / 2235.20 mm |
Weight Per Part |
36.00 lb / 16.33 kg |
*Measurements are overall part dimensions and are not representative of actual flow area or earthen fill area.
Back to top
Fittings
SmartDitch offers the following fittings for our 12”-depth and 24”-depth series applications:
- Straight Bulkheads
- Available with or without openings for water dispersal.
- Maximum diameter openings for applications:
- 12"-depth series = 6" diameter
- 24”-depth series = 12” diameter
- Bulkhead closure located on downstream portion of straight application
|
 |
- Left / Right Bulkheads
- Available with or without openings for water dispersal.
- Maximum diameter openings for applications:
- 12"-depth series = 6" diameter
- 24”-depth series = 12” diameter
- Bulkhead closure located on left/right portion of tee-design part.
- Multi-directional design for ease of installation/usage.
|
 |
- Multi-directional Tee Sections
- Multi-directional design for ease of installation/usage.-Well suited application for radial turns.
|
 |
Back to top
|
