
The water diversion area is measured out to determine the number of sections needed.
The SmartDitch Semi-Circular Ditch Liner System is often used for both permanent and temporary applications. The Semi-Circular Ditch Liner System is an above ground installation and uses Saddles to hold the ditch in place. SmartDitch’s unique corrugated design helps provide consistent and predictable flow rates. The HDPE construction provides excellent tensile strength and is chemical, abrasion and UV resistant. SmartDitch’s Semi-Circular Ditch Liner System is light weight and comes in easy to transport and carry lengths that make it easy to handle and install.
8′ Long Sections • 64 Pounds per Section
Slope % | Flow cfs | Velocity fps |
---|---|---|
0.50 | 5.41 | 3.10 |
1.00 | 7.66 | 4.38 |
2.5 | 9.31 | 5.33 |
5.00 | 13.17 | 7.53 |
7.50 | 16.13 | 9.23 |
10.00 | 18.62 | 10.66 |
15.00 | 22.81 | 13.05 |
20.00 | 26.34 | 15.07 |
Item Description | 24″ Depth Semi-Circular |
---|---|
Overall exterior width | 39.00 in / 990.60 mm |
Overall exterior height | 19.00 in / 482.60 mm |
Overall exterior length | 93.00 in / 2362.20 mm |
Lay length | 88.00 in / 2235.20 mm |
Weight Per Part | 36.00 lb / 16.33 kg |
*Measurements are overall part dimensions and are not representative of actual flow area or earthen fill area.
The water diversion area is measured out to determine the number of sections needed.
The Semi-Circular sections are fitted to trim and place along the new channel route.
The liner sections are connected using a vice grip and lag bolts.
The saddle is drilled through to attach the channel to the ground and secured in place with cable locks.
The Semi-Circular Ditch Liner works best in temporary situations in order to redirect water during construction or other projects that require water to be removed.